2011 Aston Martin Rapide คู่มือการประกอบล้อ ค้นหาว่าล้อและยางชนิดใดที่เหมาะกับ 2011 Aston Martin Rapide
Aston Martin Rapide VH [2010 .. 2014]
เจเนอเรชั่น
Liftback
2011 Aston Martin Rapide VH [2010 .. 2014] - การดัดแปลง
Petrol:
5.9i V12 469hpAston Martin Rapide VH [2010 .. 2014] 5.9i
469 hp- เจเนอเรชั่น: VH [2010 .. 2014] [EUDM]
- การผลิต: [2010 .. 2014]
-
ภูมิภาคที่ขาย: USDM, CDM, EUDM, RUS
-
พลังงาน: 469 hp | 350 kW | 476 PS
- เครื่องยนต์: 5.9L, , Petrol
-
รูดุมล้อ / รูตรงกลางล้อ:
-
ระยะห่างรูน็อต (PCD):
-
อุปกรณ์รัดล้อ: Lug nuts
-
ขนาดเกลียว:
-
แรงบิดขันล้อ:
| ยาง | ขอบล้อ | ช่วงออฟเซ็ต มม. | แบ็คสเปซ มม. นิ้ว | น้ำหนักยาง กก. ปอนด์ |
บาร์ psi
|
||
|---|---|---|---|---|---|---|---|
OE
245/40ZR20
95Y
295/35ZR20 105Y 
|
8.5Jx20 ET42.1
11Jx20 ET47.9 |
40.1 - 44.1 45.9 - 49.9 |
163 200 6.42 7.87 |
26.0 29.9 57.4 65.9 |
2.5 2.6 36 38 |
OE
|
|
|
245/35ZR21
96Y
295/30ZR21 102Y
|
8.5Jx21 ET42.1
11Jx21 ET47.9 |
163 200 6.42 7.87 |
24.9 28.3 55.0 62.3 |
2.6 38 |
|
The size of the hole in the center of a wheel is known as the center bore or centerbore.
- Recommended for winter
- Run-flat tires
- Link comes to the calculator page for comparison
- Steel wheels
OE - Original Equipment
- Tire Pressure
- Front axle
- Rear axle
Offset is the distance in millimetres from the centre line of the wheel to the wheel’s mounting face. Given that the mounting face can be either in front of or behind the centreline, the offset can be either neutral, positive or negative.
Backspace is the distance from a wheel's mounting surface to the back edge of the wheel.
The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes
hp - Mechanical horsepower
kW - Kilowatts
PS - Metric horsepower
Tire pressure is a vehicle's recommended cold tire inflation pressure. It is measured in bars or PSI (pounds per square inch).
A sales region is a global automotive region in which a vehicle was officially sold or is still being sold.
Ex.: 7J x 15 Rim width (inches) x rim diameter (inches)
ISO standard Ex.: M12 x 1.25 Nominal diameter (mm) x pitch (mm) UN-series Ex.: 9/16" - 18 UNF Thread size (in) - thread pitch
UNF - Unified National Fine Thread
The method of attaching a wheel to a hub: wheel nuts or wheel bolts
Torque settings for wheel bolts or wheel nuts
The tires included with a new vehicle when it is purchased. OE tires are specifically chosen by the vehicle manufacturer to make the most of the vehicle's performance characteristics.